So it all started when I bought my Axis Milano wheels. There was about a quarter size spot of clear coat missing which developed into a huge spot, then multiple spots, then spots on multiple wheels, etc. They were getting black spots on them that could not be removed and looked horrible close-up. So I got a little advice from Toykilla and got some supplies together.
I started by cleaning all four wheels, which were pretty dirty. I cleaned them inside and out, behind the spokes, lug holes, etc.
Wheel refinishing 001.jpg
|
Wheel refinishing 002.jpg
|
Wheel refinishing 003.jpg
|
Wheel refinishing 004.jpg
|
Wheel refinishing 005.jpg
|
Wheel refinishing 006.jpg
|
After cleaning, I started to wetsand the clearcoat off of the wheels. I made a mistake here. Instead of starting the wetsanding, I should have used the Aircraft stripper. Doing this caused me to have to do much more wetsanding to get it back to the polished look I was going for. When I used the stripper, it left the surface much brighter and required much less sanding and polishing.
Anyways, the first wheel (the one I wetsanded the clear off of):
Wheel refinishing 101.jpg
|
Wheel refinishing 102.jpg
|
Wheel refinishing 103.jpg
|
This is the second wheel which I used stripper to remove the clear:
Wheel refinishing 201.jpg
|
Wheel refinishing 202.jpg
|
Wheel refinishing 203.jpg
|
Wheel refinishing 301.jpg
Here is the difference between the two. |
Wheel refinishing 302.jpg
After stripping the clear coat, I wetsanded all four wheels to a dull finish. The factory finish did not look clear up close at all. After wetsanding the first wheel from 320 grit to 600, then 1000, then 2000 this is the finish that I got. |
Wheel refinishing 303.jpg
Then I polished the wheel with the Mother's Powerball and the Mother's Mag & Aluminum polish. |
Wheel refinishing 304.jpg
Right one is polished, left one is factory finish without clear. |
Wheel refinishing 305.jpg
Then polish by hand. |
Wheel refinishing 401.jpg
|
Wheel refinishing 402.jpg
|
Wheel refinishing 403.jpg
|